Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser that works with CAN buses. It's discrete, doesn't employ key fobs or LED indicators and is hidden within the wiring of the vehicle.
It also allows users to turn off the system temporarily by using Transport Mode for when they are renting out their vehicle. This guide will walk you through the installation process of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning attacks and relay attacks. The system is directly connected to the ECU of your car and protected by a pin code that you choose. It is inaccessible to thieves using scanners for diagnostics or other modern methods, and is not able to be disabled through circuit cuts.
The system is simple to use, but it is essential to have a an expert installation to ensure a smooth and secure connection to your vehicle's ECU. Installers certified by Thatcham can assist with the installation and programing of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.
The first step is to disconnect your battery to prevent accidental airbag deployment or short circuits. After this is completed, the installer can safely begin work. Basic hand tools are useful for securing connections with precision and a multimeter may be used to check electrical values and safety. Cable ties and insulation tape are also essential for protecting connections and keeping wiring tidy. In addition, the user's manual provides specific guidance tailored to your Ghost Immobiliser model.
It is important to choose a grounding location that is free of any paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H & can L are connected to the proper ECU ports. These wires can be plugged in or soldered depending on the model. To ensure a secure and durable connection it is recommended that you use a high-quality plug.
Transport Mode can be turned on by the customer once the installation is completed. This allows mechanics or valet parking to use the vehicle, without knowing the pin code. The customer must press the icon for service on the dashboard five times over 2 seconds. After that the system will confirm with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great option for those who rent their vehicles regularly through platforms like Turo. Immobilisers can lower insurance costs, since it reduces the risk of theft.
Getting Started
It's not difficult to come up with an autowatch ignition device for those who want to safeguard your car from thieves. It prevents your car from running even when someone copies or steals your key. It is possible because of its advanced technology, which prevents the engine from starting until the right PIN code has been entered.
immobiliser ghost connects to the CAN bus network in your vehicle, allowing it to communicate with the ECU directly. It makes use of buttons already on the dashboard and steering wheel to create a unique sequence that only you know which makes it impossible for someone else to start your vehicle. This is the ultimate security system to protect your pride and joy and preserve its value in the event that you decide to sell it in the future.
Installing a ghost immobiliser can be an easy procedure, but it's important to follow the steps carefully to avoid electrical issues and system malfunctions. First, you must locate and determine a constant 12V power source as well as a good grounding point on the chassis of your vehicle. After that, you are able to begin to connect the wires for the immobiliser. Use high-quality connectors, and soldering techniques for an effective connection. Also, ensure that you protect the connections by insulating them with heat shrink tubing and insulation tape to protect them from short circuits in electrical power and other problems.
Once the wires are connected, you can reconnect the battery and start the engine to test the immobiliser's function. If everything is functioning properly, you can install it in a secure place under the dash or elsewhere in the vehicle. Make sure to hide it in a secure manner to prevent thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it's a top-quality deterrent for car thieves. It is a superior defense against key cloning, hacking, and relay attacks. It can't be disabled without knowing the code. The device is easy to use, and can be set up to the service valet setting to ensure that your vehicle won't be activated if you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to its CAN bus. The Ghost Immobiliser will not interfere with your vehicle's factory settings unlike other aftermarket systems which require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanners. This is because the system does not transmit and receive radio frequency signals and it relies on the CAN data format to communicate with your ECU. Furthermore, it doesn't require any modification to your vehicle's existing key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition of your car and enter your disarm sequence (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. Now you can begin driving your car safely.
Once installed Once installed, the Ghost Immobiliser will safeguard your vehicle from key cloning and hacking while preserving the value of your pride and joy. If you ever need to hand over your vehicle for service or valet parking The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need to identify a source of constant power (12V) and an earthing point. Make sure that both are properly insulated and can be touched. It's also recommended to use cable tie to secure and bundle the wires, as this reduces the risk of being tampered with by thieves. Make sure you double-check the position of these points to avoid making mistakes and mark them with the help of tape or a label. It's also a good idea to inspect all connections for signs wear and tear. Loose connections can lead to system malfunctions, so be sure that they're firmly in place and properly insulated. Don't forget to test your Ghost Immobiliser once the installation is completed. This will make sure that the unit functions properly and that all connections and insulation are safe. If you encounter any issues, be sure to address them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that connects seamlessly with your vehicle's ECU in order to prevent unauthorised motor starting. Its cutting-edge technology safeguards your vehicle from key cloning, hacking, and other typical tactics thieves employ to steal cars. The Ghost is also able to work in conjunction with other alarm and tracking systems to offer the best protection for your vehicle. The Ghost's unparalleled features, combined with its discreet design, make it a popular option for both car enthusiasts as well as security-conscious drivers.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow all steps of the installation procedure. Consult the wiring diagram of your vehicle as it will assist you in locating and connecting the wires. Then, you'll need to identify the power source and grounding points. Once these are found, you'll be required to mark them so that they're easy to identify when installing. In addition, it is important to use top-quality tools and materials. Hand tools are essential to help you make precise connections. A multimeter can verify electrical values and guarantee safety. Insulation tape and cable tie will ensure that all connections are tidy. A Ghost-specific user manual is also available.
It is crucial to test the system before installing it. Enter the PIN code into the system and then start the vehicle. This test will verify that the immobiliser works in the way it was intended, preventing unauthorized vehicle start-ups. This procedure should be carried out regularly as part your regular inspections of the vehicle to ensure that the system is always functioning properly.
After the installation has been completed, you are now able to start driving your car with confidence. The Ghost will help keep your car and its contents safe from potential thieves and ensure that no one can escape with your car without the correct PIN. The Ghost can be used in conjunction with an approved Thatcham tracker that detects any attempts at theft or tampering. This lets you locate your car if it's stolen.
The Ghost is compatible with a wide variety of automobiles, including those from most major manufacturers. If you are interested in protecting your car with this innovative device, contact Monty's Locksmith today to learn more about our installation and maintenance options. We are a TASSA Registered installer This certification ensures that we adhere to strict guidelines and procedures for installing our products. This assures customers as well as insurance companies and law enforcement agencies that all installations are done safely and properly.